YO3GGX Projects Forum

Link to the K3s programmer's reference manual http://www.elecraft.com/manual/K3S&K3&KX3&KX2%20Pgmrs%20Ref,%20F8.pdf All testing is done on my local network using a dedicated computer, AMD A4 Windows 10. Phone is a Moto (Lenovo) G4, with Android 6.x. Baud rate to the rig is 38,400 which i...

Dan - Thanks very much. Yes, the K3s will respond to the inquiry in transmit mode. I tried the PTT Polling per your suggestions. There is no indication of PTT anywhere on the screen. If I touch XMIT on the rig, nothing happens on the phone. With the POLLING interval at 01, a lot of audible dropouts ...

Dan - I'll look forward to the update. Will it also cure the graphical crash on rotation? Would you help me with some code. I'm sure it's syntax and I'm a hardware guy, not software:) Here's what I tried for PTT polling. Where would this be indicated on the app? Elecraft TQ command returns "TQ0...

Dan -

We've discussed this...that on 0.9x it goes into Tune on power-up. Per your comments..then the Startup commands don't get executed. Version 0.8x is fine with this file.

Gary
K3OS

Perhaps it's a locally derived audio level indicator. You have the file I'm using. I only added the few lines indicated and did not bother to look at the s-meter code. What I get on version 0.8 is a thin green line positioned where the s-meter is in ver 0.9 that moves in proportion to the audio leve...

the S-meter works on version 0.8, but not on 0.9 with the same config file.

Gary

the shift reset to normal does not work with 0.9, but is OK on 0.8. [/quote] Can you detail a little bit on this one? On further investigation this seems to work, if TUNE is not initiated on power-up. As part of of my startup routine it resets the passband shift to "normal" setting stored ...

I've just updated the Elecraft config file. In addition to the Tune issue, the shift reset to normal does not work with 0.9, but is OK on 0.8. BTW the S-meter doesn't display properly on 0.9, but I have little use for that function. To me, the SWR and TRANSMIT status are important. Would it be possi...

Dan - Here is a revised version. OK to put in your repository. Audio input is set to Line, Normal Shift is selected. I also changed the label on the Tune button to "1/0", i.e. on/off toggle. Note this file does not work on the experimental 0.9xx yet. ------------------- Brand=Elecraft Mode...

Ver 0.9-.17 the "Tune" button I created(see Elecraft post) turns "ON" on power up of the app. On ver 0.8 it is OFF at power up. Also, it seems that there is a bit of audio break-up on the new version, but it could be conincidental.

Gary
K3OS