YO3GGX Projects Forum

Hi,

That specific type of relay

Look into the datasheet:
http://store.comet.bg/download-file.php?id=3271
For that kind of relay the pull-in voltage is max 75%, meaning 9V.

During my tests was much lower, around 7V.

73 Dan YO3GGX

Hi, Dan; About #5 & #6 - After using PocketRXTX, if you change the mode manually (locally) with the app off line then the app dosen't read the the radio operating mode correctly. Same for RF power setting. I suspect this is related to your response to #4: "There is no feedback (except at st...

Hi Rob, 1. Changes from portrait to landscape or landscape to portrait causes the VFO displayed to change to VFO B if set on VFO A. The change is not made on the radio. This does, however, lock out the VFO change button. I will correct this in the next version. 2. I get no gray slider tab as describ...

Hi all,

If there are WebSDR servers owners reading this message I kindly ask them to send me a mail.

Thank you,
Dan YO3GGX

Hi Fredo, ...But the Power is not correct, it's always 5W shown on Pocket TX, indeed it's 100W really on the transceiver. I have no FT-857 to check something so maybe you can help. Please install and run HRD ip (updated last Saturday) and play with the commands related to Power: I need to know the s...

Hi,

You need to opern or to forward only TCP port.

73 Dan YO3GGX

Hi Marcin, IC-7000 will be supported starting with version 0.6, which I intend to publish in the following days. For an updated list of supported transceivers look into the following file: http://www.yo3ggx.ro/pocketrxtx/suport.jpg If you want to play with a pre-release of 0.6 (with IC-7000 support)...

Hi Fredo,

Is more than enough in terms of latency and speed. SDR is the most demanding in terms of bandwidth an processor speed.
If you connect over Internet using other type of access then is working in HRD mode too?

73 Dan YO3GGX

Hi Fredo, Hi Guys! I tried to control my rig from my smartphone but not via a wifi link, via the 3G+ network i've got in French Guyana. After had some problem for the port configuration, i had to change the port to 8080 (7809 impossible to open). And Pocket TX connected well to hrd. But i couldn't d...

Hi Steve,

IC-7100 and IC-9100 are not yet supported. If someone can run HRD ip and send me the autogenerated config file for both of them then I will add support in Pocket RXTX.

73 Dan YO3GGX