Hi Dan,
You're absolutely right !!!
Then I try it here in the forum
Hi Members...
Get my config not 100% to run.
ALL my SET's are working perfectly !!!
but
my READ Session will NOT work:
;########## The lower part of my config ##########
CMD_READ_FREQ=01,01,FE,FE,<A>,E0,03,FD,<R>,0B,<00>,<00>,<00>,<00>,<00>,<D10>,<D32>,<D54>,<D76>,<D98>,<00>
CMD_READ_MODE=04,01,FE,FE,<A>,E0,04,FD,<R>,<07>,<00>,<00>,<00>,<00>,<00>,<00=LSB;01=USB;02=AM;05=FM>,<00>
CMD_READ_SMETER=01,01,FE,FE,<A>,E0,15,02,FD,<R>,0B,<00><00>,<00>,<00>,<00>,<00>,<00>,<T2>,<T1>,<T0>,<00>
CMD_READ_ALC=01,02,FE,FE<A>,E0,15,13,FD,<R>,0B,<00>,<00>,<00>,<00>,<00>,<00>,<00>,<T2>,<T1>,<T0>,<00>
CMD_READ_PWR=01,02,FE,FE,<A>,E0,15,11,FD,<R>,0B,<00>,<00>,<00>,<00>,<00>,<00>,<00>,<T2>,<T1>,<T0>,<00>
CMD_READ_SWR=01,02,FE,FE,<A>,E0,15,12,FD,<R>,0B,<00>,<00>,<00>,<00>,<00>,<00>,<00>,<T2>,<T1>,<T0>,<00>
; ### CALIB ###
CALIB_SMETER=<MAX=255>,<0=0;15=1;30=2;45=3;60=4;75=5;90=6;100=7;110=8;120=9;140=910;160=920;180=930;200=940;220=950;241=960>
CALIB_SWR=<MAX=255>,<0=1;120=100>
CALIB_ALC=<MAX=255>,<0=0;120=100>
CALIB_PWR=<MAX=255>,<0=0;5=5;10=10;25=25;50=50;100=100>
; list of commands for the parameters feedback
POLLING=CMD_READ_SMETER,CMD_READ_PWR,CMD_READ_SWR,CMD_READ_ALC;
;############# END #############
The SMETER will not displayed anyone ...
No SMETER, no PWR, no ALC, no SWR
What am I doing wrong ?
Does anyone see my mistake?
Would be nice if someone tells me where the error lies.
I can not go on alone
Thanks...
P.S.
Sorry.....This text was created by google translator - but I can not speak english
73 de DO1DI / Dieter