Hi Dan,
Thank you for updating the FT991(A) slider configuration. I hope the sliders will work well now.
I don’t have any proposal for changing the [PWR] button. I think the [PWR] button can stay.
It’s quite convenient to be able to select power settings quickly with the predefined buttons.
It is always available in every options set.
For finetuning, the slider is the nicest option.
I changed the predefined ones like this:
LST2NAME=PWR
LST2ITEMS=5W,10W,15W,20W,25W,50W,75W,100W
LST2CMDS=CMD_SET_PWR_5W,CMD_SET_PWR_10W,CMD_SET_PWR_15W,CMD_SET_PWR_20W,CMD_SET_PWR_25W,CMD_SET_PWR_50W,CMD_SET_PWR_75W,CMD_SET_PWR_100W
<S1=5W;S2=10W;S3=15W;S4=20W;S5=25W;S6=50W;S7=75W;S8=100W>
CMD_SET_PWR_5W=<SPC005;>
CMD_SET_PWR_10W=<SPC010;>
CMD_SET_PWR_15W=<SPC015;>
CMD_SET_PWR_20W=<SPC020;>
CMD_SET_PWR_25W=<SPC025;>
CMD_SET_PWR_50W=<SPC050;>
CMD_SET_PWR_75W=<SPC075;>
CMD_SET_PWR_100W=<SPC100;>
I have tried to get the S-meter to work but the meter always comes with value S9-60. Even if there is no signal. I think I did something wrong.
Settings are defined like this now:
CMD_READ_SMETER=01,01,<SSM0;>,<R>,07,<00>,<00>,<00>,<T2>,<T1>,<T0>,<00>
CALIB_SMETER=<MAX=255>,<0=0;10=1;17=2;25=3;40=4;52=5;70=6;90=7;115=8;135=9;150=910;170=920;189=930;214=940;226=950;250=960>
POLLING=CMD_READ_FREQ_VFO-A,CMD_READ_SMETER
Please let me know when you change the online version of 'yaesu_ft991.radio' so I will reload and test it.
Thanks for support
73, Alex PD1AX